Marker and Paint
I had a few questions come up this week, and I figured a quick blog post should answer those questions.
With the growing popularity of mixed media, people love using their markers on many different surfaces and with many different mediums. Invariably, people ask me about using their Copic Markers with Acrylic paint. I really don't recommend it, and let me show you why.
Here is the test sheet that I made. I am working on Canson Canvas Paper. I used Golden Paints, Gesso and Titanium White. I made marker swatches both under the paint and over dried paint.
First, I put R59 on the paper and let it dry for a while, to make sure it was not wet at all. I then applied a nice thick coat of Gesso and White paint. I brushed back and forth a couple times.
You can see that the red bled and was picked up and pulled around.
Then I let the paint dry all morning. I took the same marker and colored over the dry paint. The single layer of marker over the paint was fine. It did not mess up my tip, but the color also streaked on the surface of the paint.
Next, I took the red and colored over a spot of paint. I colored many layers in one spot, coloring back and forth. This re-activated the paint, and it got thick and gummy. The paint then clogged my marker nib.
Acrylic paint gets into the pores and now my nib will not allow the color to flow very well. This nib will need to be replaced before I use it on projects again, or else it will streak and possibly leave a bit of acrylic residue that will affect any other markers I use with it.
The acrylic paint re-activated the dye and pulled it through the thick layers of paint.
So, if you are wanting to use Copics with Acrylic, be extra careful! Know that the dye will bleed through, and if you color directly onto dry paint you might clog your nibs. Be careful with multiliners over paint as well, as those nibs also run the risk of being clogged from the paint.
Good luck with your work!